Customers compare RA-13 to these similar products
Products Featured in this Video
Today we're going to be taking a look at the Rack'Em shelf kit for enclosed trailers, part number RA-13. As you can see, it's a sturdy steel construction. It's got a hand-hammered finish on it. It's going to be very resistant to scratching and abrasion, also good corrosion resistance. The cross supports you see here, they've got a coating on those as well. Going to help to resist any corrosion.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Since you have wooden floors in your trailer the hardware I would recommend for installing e-track like the part #EM19147 would be the Erickson Hardware kit part #SL49FR which is basically wood screws.
view full answer...Self tappers like the part #SL99FR would work great as they have drill bits on the end which would make it through the metal of your studs and then attach.
view full answer...The fully retracted distance between the hooks of the CargoBuckle Mini G3 Retractable Ratchet Straps #IMF111640 that you referenced is 17-1/2 inches. I confirmed this with CargoBuckle. I also attached a review video for these straps for you to check…
view full answer...The Trailer King RST are a pretty middle of the road tire, not bad but not a top of the line tire. On the other hand the Kenda Loadstar ST tires are a high quality tire designed and strenuously tested in Ohio to make sure the tires are as reliable,…
view full answer...On this page (typically below the product links) there is a helpful link section that will have the install instructions fo the Hopkins Breakaway kit part #20400 that you referenced. I also attached an install video that shows the kit installed as…
view full answer...In regards to the Hopkins Engager Push-To-Test Trailer Breakaway Kit part #20400, there are only two wires with the black being power so it should be run to the positive battery terminal and the blue being brake output so it should be run to the…
view full answer...To replace your AL-KO 568303 seal you will want the Oil Seal #91030. This seal has the same inner diameter of 2.750 inches and outer diameter of 3.779 inches. It is a confirmed fit for your #99 spindle that uses the AL-KO 568303 seal.
view full answer...Though I'm not sure what you mean by "premium" I can tell you that Oil Seal #91030 does have the exact same 2.750" inner diameter and 3.779" outer diameter of the TKS seal 568303 that is used on AL-KO axles so it will work as…
view full answer...In order to install the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56434 on your 2021 Toyota RAV4 Hybrid, the first thing you need to do is disconnect the negative terminal from the battery. After this step, you need…
view full answer...The Erickson Horizontal E-Track, part #E19148 has 1/4 inch diameter mounting holes spaced 2 inches apart. The screws you use should be at least long enough to go 3/4 inch into the wood you are mounting the track to. The more screws you use the more…
view full answer...Yes, the Snap Loc E-tracks like the part #SLSS you referenced is a fit with other brands of E-track as they are all made to the same dimensions for the most part. I attached a review video for more info for you to check out as well.
view full answer...The 12V feed from your tow vehicle's 7-Way connector carries enough current to maintain a charge on your trailer mounted battery, but it does not have enough to actually charge up a depleted battery. Since the battery will really only get a…
view full answer...