Recommended Flat Tow Set-up For 2003 Honda CR-V

Question

Question:

Purchased a 2003 Honda CR-V with baseplate installed with falcon 2 tow bar. From another party I purchased a 5250 road master tow bar that was used on an 02 and 06 Saturn. How do I make this work on my Honda?

asked by: Nate H

0

Expert Reply:

To make your baseplates work with your Roadmaster 5250 Falcon tow bar, you need to determine what base plates you have you have on your 2003 Honda CR-V. We have the Roadmaster XL style # 1541-1, the Roadmaster MX # 1541-5, or the Blue Ox # BX2232. The Roadmaster baseplates will work with no adapter needed but you may want the Roadmaster Quick Disconnect Tow Bar Base Assembly # 910021-00. If you have Blue Ox baseplates, you will need the Roadmaster Tow Bar to Blue Ox Brackets Adapter # RM-031. This will make your tow bar compatible with your baseplates. You may also want the RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs # RM-643 if you don't already have those cables.

For your tow bar wiring, I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This kit will give you the diodes to allow you to utilze your vehicle's factory wiring, yet protect it. This kit gives you a nice clean 6-way connection at the front of your Honda along with the coil wiring connector. This allows your system to be clean, discrete, and extremely functional using the 12V power to maintain your Honda battery.

For your braking system, I recommend the SMI Stay-IN-Play DUO Supplemental Braking System - Proportional # SM99251. This system when installed becomes a plug and play system. There is only an initial adjustment needed at installation then you just get to forget it and play.

The last thing you need is a high-low adapter. I've attached an article to help you find the right one for your application. I've also linked the page to our options for you.

expert reply by: Jason S

0

Answer 1

Tow bars are not vehicle specific except in terms of weight capacity but it is generally easiest to use a tow bar and base plate from the same maker since this avoids the hassle and expense of the adapters that are needed to join parts from…

view full answer...

Answer 2

The difference between the Roadmaster XL Base Plates #1541-1 and the MX base plates #1541-5 is tow bar compatibility. The XL plates are compatible with all Roadmaster tow bars while the MX plates work only with the Roadmaster tow bars that slide…

view full answer...

Answer 3

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 4

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 5

Yes, your 2017 Chevrolet Equinox FWD can be flat towed with all 4 wheels on the ground. Do understand that you will need to run your Equinox for 5 minutes every time you stop for gas to properly lubricate your transmission and before towing. A better…

view full answer...

Answer 6

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 7

There are a few differences between the Demco Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor #DM86VR and the Roadmaster InvisiBrake Supplemental Braking System #RM-8700. The biggest difference between the two is…

view full answer...

Answer 8

I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit…

view full answer...

Answer 9

To determine if your motorhome has the Tiffin air brake setup or Freightliner BrakeSync you'll need to look at the rear and see if there's an quick disconnect fitting for your air line. The standard Tiffin air coupler fitting would look like…

view full answer...

Answer 10

You have a good eye Richard, as there is not a difference between the etrailer and Demco base plates that fit your 2024 Ford Maverick: - etrailer Invisible Base Plate Kit e64FV - Demco Tabless Base Plate Kit #DM77YV Both will fit your '24…

view full answer...

Answer 11

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 12

For a 2023 Jeep Wrangler 4XE you'll need the following components: Baseplate: Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These custom-fit baseplates are designed to work with factory bumpers, if you have an aftermarket bumper please…

view full answer...

Recommended Flat Tow Set-up For 2003 Honda CR-V

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching